Cisco ASR NetFlow Support : NetFlow NAT

Posted in Network Monitoring, Network Traffic Analysis on February 13th, 2012 by Steve
Cisco ASR NetFlow Support : NetFlow NAT

Cisco ASR NetFlow support for NAT can be found in the latest release of our NetFlow Analyzer but, only via Flow View because the export lacks bytes. Monitoring NAT with NetFlow is available in four different reports in the Palo Alto NetFlow exports.  One of which is shown below.

ASR NAT NetFlow Support

Monitoring NAT using NetFlow  is likely to grow in popularity on firewalls.  Palo Alto NetFlow exports are the first place we have seen it.  All of the following elements are supported:

  • postNAPTDestionatonTransportPort
  • postNAPTSourceTransportPort
  • postNATDestinationIPv4Address
  • postNATSourceIPv4Address

These new reports will allow our customers to take their network traffic analysis to another level in network monitoring.



For a free 30 day trial of Scrutinizer, Download Now!

Sign up for Advanced NetFlow Training™ coming to a city near you!

If you enjoyed this post, please consider leaving a comment or subscribing to the RSS feed to have future articles delivered to your feed reader.
Tags: , ,

2 Responses to “Cisco ASR NetFlow Support : NetFlow NAT”

  1. Palo Alto Networks NetFlow NAT Support - NetFlow & sFlow Network Monitoring - Systrax Says:

    [...] Palo Alto Networks used the standard NetFlow elements, the NetFlow NAT reports we built for the Cisco ASR NetFlow also worked for the Palo Alto NetFlow [...]

  2. Cisco ASA NAT Reports using NSEL : NAT Session Logging - NetFlow & sFlow Network Monitoring - Systrax Says:

    [...] Cisco ASR NetFlow exports [...]

Leave a Reply

You must be logged in to post a comment.